HOME OF -VIRTUAL STOPWATCH- THE VEHICLE ACCELERATION AND LAP TIME CALCULATOR

Follow Competition Car Engineering on for all the latest updates

CORNERWEIGHT SETTING APP

   

I have been asked whether the reason my Apps don't have any suspension adjustability in them is because suspension doesn't matter to a car's performance?  The answer is a DEFINITE NO!  In fact suspension set-up is one of the most important factors on a car, and it must be optimised in order for the real car to perform as per the simulations.  My performance simulation Apps automatically adjust the suspension settings based on the other selections you make, such as weight and downforce.

Use this App with your cornerweight gauge to set your cornerweights to the optimum level.  The driver (or a representative weight) should be in the driving seat when conducting cornerweight measurement, and the car should have already been set to be level left to right and with the desired rake; cornerweight changes should not affect the car's attitude relative to the ground.

 N.B this App will stop giving advice when you are within 5% of the optimum loads on each wheel.

         
   

 

   
 

LEFT FRONT

RIGHT FRONT

 
  OPTIMUM = -

-

OPTIMUM = -

-

 
       
 

LEFT REAR

 RIGHT REAR

 
 

OPTIMUM = -

-

 

OPTIMUM = -

 -

 
   

www.competition-car-engineering.com

 
   

ALL INSTRUCTIONS GIVEN LOOKING ON SPRING PLATFORM FROM ABOVE, AS SHOWN BELOW

 

 
 

COPYRIGHT 2018 Richard Machin. All Rights Reserved